D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
OBSS Co-Existence: Select the OBSS co-existence state here. Options to choose
from are Enable and Disable.
RX Chain Power Save: Select the RX chain power save state here. Options to
choose from are Enable or Disable.
Power Save status: This parameter will display the power save status.
RX Chain Power Save Quiet Time: Enter the RX chain power save quiet time
value used here. This option becomes available after the RX Chain Power
Save was enabled.
RX Chain Power Save PPS: Enter the RX chain power save PPS value used here. This option becomes available after the RX Chain Power Save was enabled.
54g™ Rate: Select the 54g™ rate value used here. This option becomes available after the 802.11n/EWC option was disabled.
Multicast Rate: Select the multicast rate used here.
Basic Rate: Select the basic wireless rate used here.
Fragmentation Threshold: Enter the fragmentation threshold value used here.
RTS Threshold: Enter the RTS threshold value used here.
DTIM Interval: Enter the DTIM Interval value used here.
Beacon Interval: Enter the beacon interval value used here.
Global Max Clients: Enter the maximum global wireless client value used here.
XPress™ Technology: Select the XPress™ technology state here. Options to
choose from are Enabled and Disabled.
WMM (Wi-Fi Multimedia): Select the WMM (Wi-Fi Multimedia) state here. Options
to choose from are Auto, Enabled and Disabled.
WMM No Acknowledgement: Select the WMM No Acknowledgement state here.
Options to choose from are Enabled and Disabled.
WMM APSD: Select the WMM APSD state here. Options to choose from are
Enabled and Disabled.
To Next Page
Loading...
Need help?
General
