Need help?Do you have a question about the D-Link DSL-2750U and is the answer not in the manual?
Data Transfer Rates| G.dmt full rate downstream | up to 8 Mbps |
|---|---|
| G.dmt full rate upstream | up to 1 Mbps |
| G.lite ADSL downstream | up to 1.5 Mbps |
| G.lite ADSL upstream | up to 512 Kbps |
| G.dmt.bis full rate downstream | up to 12 Mbps |
| G.dmt.bis full rate upstream | up to 12 Mbps |
| ADSL full rate downstream | up to 24 Mbps |
| ADSL full rate upstream | up to 1 Mbps |
Media Interface| ADSL interface connector type | RJ-11 |
|---|---|
| ADSL interface cable type | 24/26 AWG twisted pair telephone line |
| LAN interface port type | RJ-45 |
| LAN interface standard | 10/100BASE-T Ethernet |
Defines the intended users and scope of the manual.
Explains formatting conventions used in the manual.
Outlines the structure and content of each chapter.
Describes the router's multifunctionality and connectivity options.
Details hardware and software specifications of the DSL-2750U router.
Details the physical layout and components of the router.
Describes the top view of the router, including LEDs.
Details the ports and buttons on the back and bottom of the router.
Lists the items included in the router's packaging.
Important preliminary information before starting installation.
Specifies supported operating systems for router configuration.
Lists recommended web browsers for accessing the router interface.
Details requirements for PC network adapters (NICs).
Requirements for wireless clients connecting to the router.
Instructions for connecting and configuring a USB modem for Internet access.
Steps to connect a PC to the router for initial setup.
Detailed steps for connecting a PC using an Ethernet cable.
Guides users on setting up automatic IP address acquisition in Windows XP.
Guides users on setting up automatic IP address acquisition in Windows 7.
Steps for connecting a PC to the router wirelessly.
Guides users on configuring a Wi-Fi adapter in Windows XP.
Guides users on configuring a Wi-Fi adapter in Windows 7.
Instructions on how to access the router's web-based configuration interface.
Explains the layout and sections of the router's web interface.
Details the information presented on the router's summary page.
Describes the main navigation and links available on the router's home page.
Provides an overview of the different configuration sections available in the menu.
Explains how system notifications are displayed in the interface.
Steps to use the wizard for initial router setup and configuration.
Guides on choosing the correct connection method (ADSL, Ethernet, 3G/LTE).
Steps for creating a WAN connection using a 3G or LTE USB modem.
Instructions for selecting an Ethernet port to be used as the WAN port.
General steps to create a WAN connection based on ISP data.
Configuration details for static IPv4 or IPoA WAN connections.
Configuration details for static IPv6 WAN connections.
Details for setting up PPPoE, PPPoA, and dual-stack connections.
Guides on setting up the router's Wi-Fi network name and security.
How to configure LAN ports for specific multimedia services like IPTV or VoIP.
Instructions on changing the administrator password for the web interface.
Wizard for configuring LAN ports or wireless interfaces for multimedia devices.
Overview of different types of statistics available for the router.
Displays data on current network connections, IP, and traffic.
Shows information about clients identified by the DHCP server.
Displays information on network routes, destinations, and gateways.
Lists devices currently connected to the router's local network.
Displays active multicast groups the device is subscribed to.
Shows current network sessions, including protocols and IP addresses.
Provides troubleshooting data and status of the DSL line.
Menu for configuring basic network parameters and Internet connections.
Manages WAN connections, including creation and editing.
Steps for configuring various IPv4 WAN connection types.
Steps for configuring various IPv6 WAN connection types.
Details for setting up PPPoE, PPPoA, and dual-stack connections.
Configuration for PPPoE IPv6 and dual-stack WAN connections.
Steps to configure the router in bridge mode for WAN connection.
Guides on creating a WAN connection using a 3G USB modem.
Guides on creating a WAN connection using an LTE USB modem.
Settings for the router's local area network (LAN) interface.
Configuration of router's IPv4 address and DHCP server.
Configuration of router's IPv6 address assignment settings.
Enables and configures a backup WAN connection for uninterrupted internet access.
Menu for configuring all wireless network settings.
Configures fundamental wireless network parameters like SSID and security.
View and manage wireless clients connected to the router.
Enables and configures WPS for easy wireless device connection.
Guides on using WPS via the web interface for device connection.
Guides on using WPS directly via router buttons without web access.
Configures Wi-Fi Multimedia for QoS and traffic prioritization.
Advanced parameters for optimizing the wireless network performance.
Filters network access based on MAC addresses of devices.
Configures the router to act as a print server for shared printers.
Manages connected USB storage devices, including viewing data and unmounting.
Displays details about the connected USB storage device.
Creates and manages user accounts for accessing USB storage data.
Enables and configures the Samba server for network file sharing.
Enables and configures the FTP server for network file access.
Allows browsing and managing files on the connected USB storage.
Enables and configures the DLNA server for media streaming from USB storage.
Configures and manages the built-in Transmission torrent client.
Manages USB modems, including PIN code entry and connection status.
Displays USB modem information and configures automatic connection.
Manages the SIM card's PIN code, including changing and enabling/disabling checks.
Creates groups of interfaces and ports for traffic management.
Configures router's LAN ports to act as WAN ports for Ethernet connection.
Manages DNS servers for resolving domain names to IP addresses.
Configures Dynamic DNS service for associating domain names with dynamic IPs.
Defines static routes for specific network destinations.
Configures the router for communication with a remote Auto Configuration Server (ACS).
Configures rules to allow or deny remote access to the router's interface.
Enables UPnP IGD for automatic network application parameter configuration.
Configures ADSL standards and parameters as defined by the ISP.
Allows the router to use IGMP for managing multicast traffic efficiently.
Enables SIP ALG, RTSP, and various pass-through functions for network protocols.
Creates and manages rules for filtering IP packets based on various criteria.
Configures virtual servers for redirecting incoming Internet traffic to local network IPs.
Configures the DMZ host for transferring external requests to an internal network host.
Configures MAC-address-based filtering for devices on the LAN.
Sets restrictions on accessing specific websites based on URLs.
Instructions on changing the administrator password for router access.
Resets the router to its original factory default settings.
Saves the current router configuration settings to a file.
Loads a previously saved configuration file to restore router settings.
Saves current changes to the router's non-volatile memory.
Restarts the router to apply changes or resolve issues.
Updates the router's firmware to the latest version.
Configures notifications for available firmware updates.
Configures system logging options and log sending to remote host/USB.
Checks network host availability using the Ping utility.
Determines the route of data transfer to a host using the traceroute utility.
Enables or disables Telnet access to router settings from the LAN.
Sets system time manually or configures automatic synchronization with a time server.
Enables and configures the operating mode of the Yandex.DNS service.
Specifies filtering modes for individual devices using Yandex.DNS.
Crucial safety instructions and conditions for using the device.
Tips for optimizing wireless signal range and performance.
To Next Page
