DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
Log
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host and/or a USB storage
17
connected to the router.
Figure 149. The System / Log page. The Settings tab.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
17 This function will be implemented in further versions of the firmware.
Page 192 of 210
To Next Page
Loading...
