DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
IGMP
On the Advanced / IGMP page, you can allow the router to use IGMP.
IGMP is used for managing multicast traffic (transferring data to a group of destinations). This
protocol allows using network resources for some applications, e.g., for streaming video, more
efficiently.
Figure 137. The Advanced / IGMP page.
The following elements are available on the page:
Parameter Description
Enable
Move the switch to the right to enable IGMP.
IGMP version Select a version of IGMP from the drop-down list.
Interface
From the drop-down list, select a connection of the Dynamic IPv4 or
Static IPv4 type for which you need to allow multicast traffic (e.g.
streaming video).
IGMP Snooping
The IGMP snooping function allows limiting multicast traffic for
devices connected to the Ethernet ports of the router.
If the switch is moved to the right, multicast traffic is forwarded
only to the devices which require it.
If the switch is moved to the left, multicast traffic is forwarded to all
devices connected to the Ethernet ports of the router.
After specifying the needed parameters, click the APPLY button.
Page 172 of 210
To Next Page
Loading...
Need help?
Data Transfer Rates
