DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
Print Server
On the Print Server page, you can configure the router as a print server. Being configured in this
way, the router will allow your LAN users to share the printer connected to the USB port of the
router.
To connect a printer to the router, power off both devices. Connect the printer to the USB port of the
router, power on the printer, then power on the router.
Figure 106. The Print Server page.
To configure the router as a print server, move the Enable print server switch to the right and
click the APPLY button.
If you don't want to use the router as a print server, move the Enable print server switch to the
left and click the APPLY button.
Page 138 of 210
To Next Page
Loading...
