DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
Additional
On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of
the router.
!
Changing parameters presented on this page may negatively affect your WLAN!
Figure 103. Additional settings of the WLAN.
The following fields are available on the page:
Parameter Description
Bandwidth
The channel bandwidth for 802.11n standard.
20MHz: 802.11n clients operate at 20MHz channels.
20/40MHz: 802.11n clients operate at 20MHz or 40MHz channels.
Autonegotiation
20/40 (Coexistence)
Move the switch to the right to let the router to automatically choose
the most suitable channel bandwidth (20MHz or 40MHz) for the
connected devices (this setting can substantially lower the data
transfer rate of your wireless network).
TX power The transmit power (in percentage terms) of the router.
Page 134 of 210
To Next Page
Loading...
