Wireless Security Mode – Mixed WPA2/WPA
Wi-Fi Protected Access (WPA) is a more advanced wireless security method that we can use to prevent unautherized wireless access to this router. Wi-Fi Protected
Access (WPA2) is the most advanced wireless security method that we can use to prevent unautherized wireless access to this router. This option allows us to have both
WPA and WPA2 available for client connectivity.
After selecting to use Mixed WPA2/WPA network authentication as your wireless
security mode, the following parameters will be available to configure:
Protected Management Frames: Select to Disable, Capable, or Required.
WPA2 Preauthentication: Select to enable or disable the WPA2/WPA pre-
authentication option here.
Network Re-auth Interval: Enter the network re-authentication interval value here.
WPA Group Rekey Interval: Enter the group key update interval value here.
RADIUS Server IP Address: Enter the IP address of the external RADIUS server
used here.
RADIUS Port: Enter the external RADIUS server port number used here.
RADIUS Key: Enter the RADIUS server Shared Secret here. This key must be
configured on all the wireless clients for them to be able to connect to your
wireless network.
WPA Encryption: Select the WPA2/WPA encryption method here. Options to
choose from are TKIP, AES, and TKIP+AES.
WEP Encryption: By default this is disabled.
Click the Apply/Save button to accept the changes made.
Click the Cancel button to discard the changes made and return to the main page.
To Next Page
Loading...
