EasyManuals Logo

D-Link DSL-225 User Manual

D-Link DSL-225
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
D-Link DSL-225 11N VDSL2 Router User Manual
Basic Installation
Page 9
Additional Software
It may be necessary to install software on your computer that enables the computer to access the Internet. Additional software must be installed if you are using the device a
simple bridge. For a bridged connection, the information needed to make and maintain the Internet connection is stored on another computer or gateway device, not in the
router itself.
If your VDSL service is delivered through a PPPoE or PPPoA connection, the information needed to establish and maintain the Internet connection can be stored in the
router. In this case, it is not necessary to install software on your computer. It may however be necessary to change some settings in the device, including account information
used to identify and verify the connection.
All connections to the Internet require a unique global IP address. For bridged connections, the global IP settings must reside in a TCP/IP enabled device on the LAN side of
the bridge, such as a PC, a server, a gateway device such as a router or similar firewall hardware. The IP address can be assigned in a number of ways. Your network
service provider will give you instructions about any additional connection software or NIC configuration that may be required.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-225 and is the answer not in the manual?

D-Link DSL-225 Specifications

General IconGeneral
BrandD-Link
ModelDSL-225
CategoryNetwork Router
LanguageEnglish

Related product manuals