D-Link DSL-2750U Easy Guide

Ready
to go.
Switch your router on by pressing the
power button at the back of router.
The power light will first come on red and
then eventually turn green.
The DSL light will come on and flash,
until a connection is synced. Once
synced the light will remain solid.
The Wi-Fi light will be green if Wi-Fi is
enabled.
The LAN 1 light must be green if the LAN
cable is plugged in.
The Internet light will also be green if the
account is active.
All these lights can flash as
data is transferred.
4
1
2
5
6
!
3

D-Link DSL-2750U Specifications

Data Transfer Rates

G.dmt full rate downstream	up to 8 Mbps
G.dmt full rate upstream	up to 1 Mbps
G.lite ADSL downstream	up to 1.5 Mbps
G.lite ADSL upstream	up to 512 Kbps
G.dmt.bis full rate downstream	up to 12 Mbps
G.dmt.bis full rate upstream	up to 12 Mbps
ADSL full rate downstream	up to 24 Mbps
ADSL full rate upstream	up to 1 Mbps

Media Interface

ADSL interface connector type	RJ-11
ADSL interface cable type	24/26 AWG twisted pair telephone line
LAN interface port type	RJ-45
LAN interface standard	10/100BASE-T Ethernet