EasyManuals Logo

D-Link DSL-G2562DG Setup Guide

D-Link DSL-G2562DG
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
7) Click on [Test] to test account.
Click on [Next] to proceed
Note: If the test fails, please make sure the correct details were entered on step 4
Alternatively, contact Telkom Support for a password reset
8) D-Link modem comes set with unique default WIFI password on both the 2.4 & 5 GHz band for security purposes. The
default password can be located on the back of the router. You can change the default password for both bands below
(minimum of 8 characters) or [skip] to leave as default. Click on [Next] to proceed.
Note: Write down the passwords somewhere safe as you will need them to connect to your Wi-Fi
9) For security purposes, it is strongly advised that you change our default modem login password during the first setup.
Default AdminName: admin / AdminPassword: admin
Fill in new username & password for logging into your router
Click on [Next] to proceed

Other manuals for D-Link DSL-G2562DG

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-G2562DG and is the answer not in the manual?

D-Link DSL-G2562DG Specifications

General IconGeneral
LAN Ports4 x 10/100/1000 Mbps
WAN Ports1 x 10/100/1000 Mbps
DSL Port1 x RJ-11
USB Ports1 x USB 2.0
QoSYes
Humidity5% to 95% non-condensing
Wireless Standard802.11b/g/n
Frequency Band2.4 GHz
Antenna TypeExternal
SecurityWPA/WPA2
DSL StandardsADSL2/2+, VDSL2
FirewallNAT, SPI
Wireless SpeedUp to 1200 Mbps
Device TypeWireless Router
Operating Temperature0 to 40 °C
Storage Temperature-20 to 65 °C

Related product manuals