D-Link DSL-G256DG VDSL Router User Manual
Web User Interface Configuration Page 36
In this section we can configure the following parameters.
Enable Wireless: Tick this option to enable the wireless feature on this router.
Enable Wireless Hotspot 2.0: Tick this option to enable Hotspot 2.0.
Hide Access Point: Click the checkbox to hide the Access Point.
Clients Isolation: Click the checkbox to enable the wireless client isolation feature.
Disable WMM Advertise: Click the checkbox to enable the Wi-Fi Multimedia
(WMM) advertisement feature.
Enable Wireless Multicast Forwarding (WMF): Click the checkbox to enable the
Wireless Multimedia Forwarding (WMF) feature.
SSID: Enter the Wireless name (SSID) here. This name will be available when
wireless clients scan for available wireless networks. However, when the Hide
Access Point option is enabled, this name will not be visible to wireless clients.
BSSID: This is automatically generated.
Country: This parameter will display the country information.
Country RegRev: This parameter will display the country regrev.
Max Clients: Set the number of users that can access the device.
Wireless – Guest/Virtual Access Points: Click the checkbox to enable one of the
guest Access Points.
Enabled – Select this option to enable the Guest/Virtual Access Point option for the
entry specified.
SSID – When available enter the SSID for the Virtual Access Point (VAP) here.
Hidden – Select this option to hide the SSID of the selected VAP.
Isolate Clients – Select this option to isolate the wireless clients of the selected VAP from the rest of the network.
Enable HSPOT – When available enter the hotspot value here.
Max Clients – Enter the maximum number of wireless clients that can connect to the select VAP.
Click the Apply/Save button to accept the changes made.
To Next Page
Loading...
Need help?
General
