D-Link DSL-G256DG

D-Link DSL-G256DG VDSL Router User Manual
Web User Interface Configuration Page 48
54g™ Rate: Select the 54g™ rate value used here. This option becomes available
after the 802.11n/EWC option was disabled.
Multicast Rate: Select the multicast rate used here.
Basic Rate: Select the basic wireless rate used here.
Fragmentation Threshold: Enter the fragmentation threshold value used here.
RTS Threshold: Enter the RTS threshold value used here.
DTIM Interval: Enter the DTIM Interval value used here.
Beacon Interval: Enter the beacon interval value used here.
Global Max Clients: Enter the maximum global wireless client value used here.
XPress™ Technology: Select the XPress™ technology state here. Options to
choose from are Enabled and Disabled.
54g™ Mode: Select the 54g mode here. Options to choose from are 54g Auto,
54G Performance, 54g LRS, and 802.11b Only. This option becomes
available after the 802.11n/EWC option was disabled.
54g™ Protection: Select to enable or disable 54g protection here. Options to choose from are Auto and Off. This option becomes available after the 802.11n/EWC option
was disabled. This option becomes available after the 802.11n/EWC option was disabled.
Afterburner Technology: Select the Afterburner technology state here. Options to choose from are Enabled and Disabled. This option becomes available after the WMM
option was disabled. This option becomes available after the 802.11n/EWC option was disabled.
Preamble Type: Select the Preamble Type here. Options to choose from are long and short. This option becomes available after the 802.11n/EWC option was disabled.
WMM (Wi-Fi Multimedia): Select the WMM (Wi-Fi Multimedia) state here. Options
to choose from are Auto, Enabled and Disabled.
WMM No Acknowledgement: Select the WMM No Acknowledgement state here.
Options to choose from are Enabled and Disabled.
WMM APSD: Select the WMM APSD state here. Options to choose from are
Enabled and Disabled.