Need help?Do you have a question about the D-Link DSR-250V2 and is the answer not in the manual?
General| DSL WAN | - |
|---|---|
| Ethernet WAN | Yes |
| SIM card slot | No |
| VPN tunnels quantity | 75 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Ethernet LAN (RJ-45) ports | 5 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| Security algorithms | 3DES, 128-bit RC4, AES, SNMP, SNMPv2, SNMPv3 |
| Product type | Desktop/pole router |
| Product color | Black |
| Routing protocols | OSPF, OSPFv3, RIP-1, RIP-2 |
| Wi-Fi standards | 802.11g |
| WLAN data transfer rate (max) | - Mbit/s |
| Power source type | DC |
| Power consumption (typical) | 14.4 W |
| Storage temperature (T-T) | 20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Mean time between failures (MTBF) | 123015785 h |
Weight and Dimensions| Depth | 190 mm |
|---|---|
| Width | 120 mm |
| Height | 38 mm |
Details the D-Link DSR-250V2's front panel components and their functions.
Precautions to prevent equipment failure and ensure safe installation of the device.
Guide on connecting the power adapter and operating the device's power switch.
Steps for physically connecting the router to external and internal network segments.
Accessing and logging into the Web Interface for device configuration.
Establishing a serial console connection for device monitoring and configuration.
To Next Page
