PRODUCT
SETUP
QUICK INSTALLATION
2. Plug the USB type B connector (the square end of the
supplied USB cable) into the back of the DUB-H7.
3. Plug the USB type A connector (the flat end of the
supplied USB cable) into an available USB port on your
computer.
1. Plug the power adapter into the receptor located on the
back panel of the DUB-H7. Plug the other end into a
power strip or wall outlet.
4. Your computer will automatically detect and install the
drivers for the DUB-H7. You may now connect USB
2.0 or USB 1.1 devices to an available USB port on the
front of the DUB-H7. The two black USB ports provide
additional power for fast-charging an iPad® or similar
product when the LED is green (Fast-Charge Mode).
To Next Page
Loading...
