17
Just like a regular phone call, picking up the telephone handset will answer
the DVC-1000 VideoPhone. You may also use the remote control to answer
by pressing the ENTER key when the “Answer” button on the screen is
highlighted in a dialog box.
Answering an Incoming VideoPhone call
If the telephone attached to your DVC-1000 is a cordless
model, press TALK on your phone to accept the call.
Using the DVC-1000 (continued)
Privacy Status Icons
Audio
If you select Audio Privacy in the Privacy Settings
window, the other party will not hear you and the
audio icon will appear with a slash through it.
Privacy Status Icons appear on the Main Screen.
Please see the page 15 for an illustration.
Video
If you select Video Privacy in the Privacy Settings
window, the other party will not see you and the video
icon will appear with a slash through it.
Do Not
Disturb
If you select Do Not Disturb in the Privacy Settings
window, your VideoPhone will not ring if dialed and
the other party will receive a message stating that
you are not taking calls.
Placing a Manually Dialed VideoPhone Call with the
Telephone Handset
Pick up the telephone handset.
The DVC-1000 VideoPhone senses the phone is off the hook and
a prompt appears on the screen asking you to either enter a phone
number or press # key to select the Speed Dial List.
Enter the phone number into the DVC-1000 just as if you were using
a regular phone. See Entering Phone Numbers on pages 21-22
for help on completing a videocall.
The DVC-1000 rings while you wait for your call to be answered by
the party on the other end of the call.
When the other party answers, the VideoPhone call is connected.
To Next Page
Loading...
Need help?
General
