23
Entering IP addresses
Calling a VideoPhone or H.323 Device with an IP address
If you are unable to dial another DVC-1000 by using its phone number, you can
complete a call by entering the IP address of the VideoPhone you want to call.
This will require obtaining the IP address for the device you want to call.
To complete a call to another VideoPhone or any other compatible
H.323-compliant videoconferencing device, ignore the Country code, Area
code and Phone number boxes in the Manual Dial screen. Use the remote
control to move the cursor to the Enter an IP address box.
Example: The VideoPhone or other device you are calling has an IP
address of 205.104.32.20, you would use the remote control to enter:
Using the DVC-1000 (continued)
205 and then press the * key to enter a period
104 and then press the * key to enter a period
32 and then press the * key to enter a period
20 then scroll down and select the Dial button to complete this call.
205.104.32.20
The DVC-1000 supports domain name lookup. This means you can
use the domain name of a Web site as the IP address if a VideoPhone
is connected to this Website. For example, you can avoid entering an
IP address number and instead use the on-screen keyboard to dial an
address such as: www.myvideophone.com
To Next Page
Loading...
Need help?
General
