37
Main Screen > Settings > Network > PING
Using the Conguration Menu (continued)
PING is a network or Internet utility, used to test a network or Internet
connection. If you are having problems establishing a connection to another
VideoPhone after the setup of the DVC-1000, you can use the PING function
to test if your Internet connection is working correctly.
To use the PING function, from the remote control, enter a known IP address
on your network or on the Internet into the Input Host Address box. Press
the PING button. If the IP address is valid, and the connection is made
successfully, a “Pass. Host Reachable” message is received. If you enter a
valid IP address and the PING utility fails to reach the host, you will receive a
“Failed. Host Unreachable.” message. This indicates that a possible problem
with your Internet connection exists.
Press OK to return to the Network Settings screen.
To Next Page
Loading...
Need help?
General
