D-Link DWL-2100AP Install Guide

9 D-Link DWL-2100AP Quick Install Guide
Step 2 - Wireless Setup
The default wireless settings
are:
SSID = dlink
You can change these settings
to match an existing wireless
network.
Click Next
Step 3 - Encryption
The DWL-2100AP is capable of
two levels of wireless encryption
WEP and WPA-PSK. By default
the encryption is disabled. You
can change the encryption
settings for more secure wireless
communication.
Your Setup is Complete!
Click Next
Click Restart

D-Link DWL-2100AP Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Base-TX (RJ-45)
Device Type	Wireless Access Point
Form Factor	External
Data Link Protocol	IEEE 802.11b, IEEE 802.11g
Antenna Qty	1
Interface	1 x 10Base-T/100Base-TX - RJ-45
Power Supply	External power adapter
Wireless Standard	IEEE 802.11b/g
Antenna	Detachable
Compliant Standards	IEEE 802.11b, IEEE 802.11g
Encryption Algorithm	WEP, WPA, WPA2
Authentication Method	RADIUS
Features	MAC address filtering
Operating Modes	Access Point, Repeater