100
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Networking Basics
Click Apply Now.
The IP Address, Subnet mask, and the Router’s IP Address will appear in a few
seconds.
Go to Start > Run > type cmd. A window similar to this one will appear. Type ping
xxx.xxx.xxx.xxx, where xxx is the IP address of the wireless router or access point.
A good wireless connection will show four replies from the wireless router or access
point, as shown.
Checking the Wireless Connection by Pinging
in Windows
®
XP and 2000
To Next Page
Loading...
