D-Link DWL-3200AP - AirPremier - Wireless Access Point

13
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Using the Configuration Menu
To configure the DWL-3200AP, use a computer which is connected to the DWL-3200AP
with an Ethernet cable (see the Network Layout diagram).
First, disable the Access the Internet using a proxy server function. To disable this
function, go to Control Panel > Internet Options > Connections > LAN Settings
and uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator
™
) .
Type the IP address and http port of the DWL-3200AP in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-3200AP and your computer are in the same subnet.
After the connection is established, you will see the user identification window as
shown.
Note: If you have changed the default IP address assigned to the DWL-3200AP, make sure to
enter the correct IP address.



Type admin in the User Name field
Leave the Password field blank
Click OK
Note: If you have changed the password, make sure to enter the correct password.