16
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Auto Channel
Scan:
Authentication:
Select Enable or Disable. (Enable this feature to auto-select the
channel for best wireless performance.)
Open System
Shared Key
Open System/Shared Key
WPA-Enterprise
WPA-Personal
WPA2-Enterprise
WPA2-Personal
WPA-Auto-Enterprise
WPA-Auto-Personal
Home > Wireless > AP mode (continued)
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Enterprise, WPA2-Enterprise, WPA-Auto-Enterprise
to secure your network with the inclusion of a RADIUS server.
Select WPA-Personal, WPA2-Personal, WPA-Auto-Personal to
secure your network using a password and dynamic key changes.
(No RADIUS server required).
Using the Configuration Menu
Radio:
Super G Mode:
Select On or Off.
Super G is a group of performance enhancement features that
increase end user application throughput in an 802.11g network.
Super G is backwards compatible to standard 802.11g devices.
For top performance, all wirelss devices on the network should be
Super G capable. Select either Disabled, Super G without Turbo,
or Super G with Dynamic Turbo.
Disabled:
Standard 802.11g support, no enhanced capabilities.
Super G
without
Turbo:
Capable of Packet Bursting, FastFrames, Compression,
and no Turbo mode.
Super
G with
Dynamic
Turbo:
Capable of Packet Bursting, FastFrames, Compression,
and Dynamic Turbo. This setting is backwards compatible
with non-Turbo (legacy) devices. Dynamic Turbo mode is
only enabled when all devices on the wireless network are
configured with Super G with Dynamic Turbo enabled.
To Next Page
Loading...
