23
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Home > Wireless > WDS mode
In WDS mode, the DWL-3200AP wirelessly connects multiple networks, without
functioning as a wireless AP.
WDS is selected from the pull-down menu.
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is default. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
6 is the default channel. All devices on the network must share the
same channel.
Mode:
SSID:
Wireless Band:
IEEE 802.11g
Using the Configuration Menu
SSID Broadcast:
Channel:
To Next Page
Loading...
