D-Link DWL-3200AP - AirPremier - Wireless Access Point

37
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Advanced > Multi-SSID
If you want to configure the Guest and Internal networks on Virtual LAN (VLANs), the
switch and DHCP server you are using must suppport VLANs. As a prerequisite step,
configure a port on the switch for handling VLAN tagged packets as described in the
IEEE802.1Q standard.
Check to use Multi-SSID.
Check to use a VLAN.
IEEE802.11g is selected.
You can select up to 7 multi-SSIDs. The default multi-SSIDs is the
primary, which puts the total to 8 multi-SSIDs.
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is default. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
The Multi-SSIDs security can be WPA/WPA2-Enterprise or
WPA-Auto-Enterprise only when the Primary SSID’s security is at the
same security level. Also, they must connect to the same RADIUS
server.
Enable Multi-SSID:
Enable VLAN Status:
Band:
Index:
SSID:
Security: