D-Link DWL-3200AP - AirPremier - Wireless Access Point

59
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the AP Manager
Device Configuration > Wireless
SSID:
The Service Set (network) Identifier of your wireless network.
Channel:
Allows you to select a channel. 6 is the default setting (see Auto
Channel Scan on the next page).
Wireless:
Check to enable wireless mode.
SSID Broadcast:
Allows you to enable or disable the broadcasting of the SSID to
network clients.
Wireless B/G Mode:
Select Mixed, 11G Only, or 11B Only.
Super G:
Select this option to enable a wireless signal rate of up to 108Mbps.
Radio Wave:
Select On or Off.
WMM:
Select Enable or Disable, Disable is selected by default. WMM
stands for Wi-Fi Multimedia, by enabling this feature it will improve
the user experience for audio and video applications over a Wi-Fi
network.
Preamble:
Select the default value Short and Long, or Long Only.