D-Link DWL-3200AP

To Next Page

To Previous Page

DWL-3200AP User’s Manual

D-Link Systems, Inc.

Using the Configuration Menu

To configure the DWL-3200AP, use a computer which is connected to the DWL-3200AP

with an Ethernet cable (see the

Network Layout

diagram).

First, disable the

Access the Internet using a proxy server

function. To disable

this function, go to

Control Panel > Internet Options > Connections > LAN

Settings and uncheck the enable box.

Start your web browser program (Internet Explorer, Netscape Navigator) .

Type the IP address and http port of the DWL-3200AP in the address field

(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the

DWL-3200AP and your computer are in the same subnet.

http://192.168.0.50

After the connection is established, you will see the user identification window as

shown.

Note: If you have changed the default IP address assigned to the DWL-3200AP, make sure to enter

the correct IP address.



Type admin in the User Name field

Leave the Password field blank

Click OK

Note: If you have changed the password, make sure to enter the correct password.

Other manuals for D-Link DWL-3200AP