30
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Advanced > DHCP Server > Static Pool Settings
DHCP Server
Control:
Assigned IP:
Assigned MAC
Address:
SubMask:
Gateway:
Dynamic Host Configuration Protocol assigns IP addresses to
wireless devices on the network. This protocol simplifies network
management and allows new wireless devices to receive IP
addresses automatically without the need to manually assign IP
addresses.
Select Enable to allow the DWL-3200AP to function as a DHCP
server.
Use the Static Pool Settings to assign the same IP address to a
device at every restart. The IP addresses assigned in the Static Pool
list must NOT be in the same IP range as the Dynamic Pool. After
you have assigned a static IP address to a device via its MAC
address, click Apply; the device will appear in the Assigned Static
Pool at the bottom of the screen. Edit or delete the device in this list.
Enter the MAC address of the device here.
Enter the subnet mask here.
Enter the IP address of the gateway on the network.
To Next Page
Loading...
