D-Link DWL-3200AP

65
DWL-3200AP User’s Manual
D-Link Systems, Inc.
You must always click Apply
in the Configuration window
if you want the settings to
take effect.
Using the AP Manager
To load a previously saved configuration file, follow these steps:
 Select a device from the Device List on the main screen of the AP Manager.
 Click the device configuration button.
 Click the Open button.
 A popup window will appear prompting you to locate the configuration file. Locate
the file and click Open.
 The configuration file is loaded into the AP Manager but has not actually been written
to the device(s). If you want to use the newly loaded configuration for the selected
device(s), click Apply and the configuration settings will be written to the device(s).
Device Configuration button.