D-Link DXS-1210-10TS - Security > RADIUS > RADIUS Statistic; Security > Network Access Authentication > Guest VLAN; Security > Network Access Authentication > Network Access Authentication Global Settings

D-Link DXS-1210 Series User Manual
111
Click the Apply button to save your settings.
Security > RADIUS > RADIUS Statistic
The RADIUS Statistic page is used to view and clear the RADIUS statistics information.
Figure 4.181 – Security > RADIUS > RADIUS Statistic
Group Server Name: Select the RADIUS group server name from this list here.
Click the Clear button to clear the information based on the selections made.
Click the Clear All button to clear all the information in this table. Enter a page number and click the Go
button to navigate to a specific page when multiple pages exist.
Security > Network Access Authentication > Guest VLAN
The Guest VLAN page is used to view and configure the network access authentication guest VLAN settings.
Figure 4.182 – Security > Network Access Authentication > Guest VLAN
From Port / To Port: Select the appropriate port range used for the configuration here.
VID (1-4094): Enter the VLAN ID used here. This value must be between 1 and 4094.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Security > Network Access Authentication > Network Access Authentication Global Settings
The Network Access Authentication global Settings page is used to view and configure the network access
authentication global settings.
Figure 4.183 – Security > Network Access Authentication > Network Access Authentication Global Settings