D-Link EAGLE PRO AI N300 Smart - Wireless Network Settings

43D-Link G403 User Manual
Section 3 - Conguration
Advanced Settings - Address Autoconguration Settings (DHCP-PD
enabled)
Enable Automatic
IPv6 Address
Assignment
Enable or disable the Automatic IPv6 Address Assignment.
Enable Automatic
DHCP-PD in LAN
Enable or disable DHCP-PD for other IPv6 routers connected
to the LAN interface.
Autoconguration
Type
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
DHCPv6.
If you select
SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:
Router
Advertisement
Lifetime
Enter the router advertisement lifetime (in minutes).
If you select
Stateful DHCPv6 as the Autoconguration Type:
IPv6 Address
Range (Start)
Enter the start IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address
Range (End)
Enter the end IPv6 address for the DHCP server’s IPv6
assignment.