D-Link EAGLE PRO AI N300 Smart - Wireless

48D-Link G403 User Manual
Section 3 - Conguration
Wireless
Go to Settings > Wireless to see your wireless network settings for your router.
Click Save at any time to save the changes you have made on this page.
2.4GHz
Status Enable or disable the 2.4GHz / 5GHz wireless network.
Wi-Fi Name (SSID) Create a name for your wireless network. Up to 32 characters
are allowed.
Password Create a password to use for wireless security. Wireless clients
will need to enter this password to connect to the network.
2.4GHz - Advanced Settings...
Security Mode Choose None, WPA/WPA2-Personal, WPA2-Personal, WPA2/
WPA3-Personal, or WPA3-Personal. WPA3 provides the
highest level of security among these. Note that WPS will be
disabled if WPA3 is used.
802.11 Mode (2.4GHz) Select the desired wireless networking standards to use.
The available options for the 2.4 GHz wireless network are
Mixed 802.11b/g/n, Mixed 802.11b/g, Mixed 802.11g/n,
802.11b only, 802.11g only, and 802.11n only.
Wi-Fi Channel Select the desired channel:1-11. The default is Auto
(recommended).
Transmission Power
Channel Width
(2.4GHz)
Select the desired wireless transmission power: High, Medium,
or Low.
Select Auto 20/40 MHz if you are using both 802.11n and
non-802.11n (802.11b/g/a) devices, or select 20 MHz if you
are using a mix of 802.11b/g/a devices.