DIR-X1860 Quick Installation Guide
Wi-Fi Client
This configuration step is available for the WISP Repeater, Repeater, and
Client modes.
1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button
and select the network to which you want to connect in the opened
window. When you select a network, the Network name (SSID) and
BSSID fields are filled in automatically.
If you cannot find the needed network in the list, click the UPDATE LIST
icon ( ).
2. If a password is needed to connect to the selected network, fill in the
relevant field. Click the Show icon ( ) to display the entered
password.
If you connect to a hidden network, select the band where the hidden network
operates from the Frequency band list and enter the network name in the
Network name (SSID) field. Then select a needed value from the Network
authentication list and then, if needed, enter the password in the relevant
field.
3. Click the NEXT button.
27
To Next Page
Loading...
Need help?
General
