5D-Link DCH-S220 User Manual
Section 1 - Product Overview
Hardware Overview
Side
1 Status LED
Solid Green The device is connected to the network
Blinking Green (slow) WPS is working
Blinking Orange The device is not connected to the network
Solid Red The device is powering on or the rmware is being upgraded
2 WPS Button
Press the WPS button for 1 second to connect the siren to your wireless router using Wi-Fi Protected Setup.
3 Reset Button Press the reset button for 5 seconds to reset the DCH-S220 back to the factory default settings.
2
1
3
To Next Page
Loading...