The Light Weight Engine Houtekietstraat 11
B-8540 Deerlijk, Belgium
EFFECTIVITY page 38
ALL 19-3-2019
200-hour-inspection
• carry out the 100-hour-inspection.
• Check the spark plug caps. Change if necessary.
• Change the fuel filter.
• Change the air filter.
Preservation of the engine for long term storage
For long out of operation periods and at extreme climatic conditions, we recommend the
following instructions to protect against corrosion. Extra protection against corrosion beyond
these recommendations is not necessary.
1. Change the engine oil in accordance with the section in this manual
2. Blank all openings, the exhaust tubes, the breather tube and air filters. Place in a
large heavy duty plastic bag with a minimum of 4KG of desiccant bags. Take care
not to puncture the plastic storage bag.
Using a vacuum cleaner, draw all the air out of the storage bag and seal the neck
of the bag by gathering the neck, folding it back on itself and clamping with a
large ty-wrap. Re-activate the desiccant bags at least once a year by placing in a
warm oven at 100 deg c for several hours.
Bringing the engine back operation
remove all the protections !!!
Winter operation
Care of the electrical system
Generally in the beginning of
the winter an engine inspection shall be performed.
• check all the connections of the ignition system and clean if necessary.
• Check the battery voltage.
• The battery poles and terminal connectors should be cleaned.
To Next Page
Loading...