The Light Weight Engine Houtekietstraat 11
B-8540 Deerlijk, Belgium
EFFECTIVITY page 45
ALL 19-3-2019
Oil filter P/N 107001
Oil temperature min 50° C to max 100° C
80°C to 95 °C best range
Coolant Water with anticorrosive (50/50)
(for Aluminium engines)
Coolant exit temperature Not more than 10°C higher then inlet temperature.
75°C to 100°C (opening pressure at 1.2 bar at MSL)
There is a big difference between ‘Ambiënt’ temperature and ‘effective’ temperature.
Having a temperature monitoring sticker on the backplate indicating 105°C / 221 °F for
example means that the engine has temperatures of over 130 – 140°C/266°F – 284°F
These temperatures are having a distructive influence on your engine !
EGT and CHT ?
An exhaust gas temperature gauge (EGT gauge) is a meter used to monitor the exhaust gas
temperature of an internal combustion engine in conjunction with a thermocouple-type
pyrometer. ... By monitoring EGT, the driver or pilot can get an idea of the vehicle's air-fuel
ratio (AFR).
Cylinder Head Temperature (CHT) Gauge - Indicates the temperature of at least one of the
cylinder heads. Used to set the fuel/air mixture.
D-Motor delivers optional a dashboard gauge with monitoring probes per cylinder. (P/N
500052)
To Next Page
Loading...
