10
TURNING ON AND OFF
Turning the Unit On:
Press and hold the On/Off button on the Collar Receiver.
The Red LED Indicator will light solidly for a second.
Release the button when the LED light begins flashing.
The unit is now On. The LED Indicator will now flash
approximately every two seconds. (Note: The
Transmitter is always in a permanent sleep state. It is
only On when a button is being pressed, and does not
need to be turned off by the user).
Turning the Unit Off:
When you are ready to shut the unit off, simply press and
hold the On/Off button for a few seconds. The Red LED
indicator will again light solidly for a second before it
begins flashing. Release the button when it flashes.
PARTS & FUNCTIONS - COLLAR
Collar Receiver (RH1252B shown)
** Beeper
horn and
wire only
available on
RH1250B
Series
To Next Page
Loading...
