EasyManua.ls Logo

D.T.Systems RH1202 - Redhead Dog Trainer Batteries and Charging; Battery Charging Procedure

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
BATTERIES
All Redhead collars are equipped with rechargeable
Nickel Metal Hydride (NiMH) batteries. NiMH batteries
are not memory sensitive and do not require depletion
before recharging.
The batteries come partially charged from the factory.
However, it is recommended that you give the battery
a full charge (about 12 hours) before the first use.
Remember - Always keep batteries away from
flammable substances (especially when charging).
When storing the unit for long periods remember to
regularly give the batteries a full charge (12 hours)
once every 4 to 6 weeks.
Battery Charging Procedure
1. Turn the unit off.
2. Plug the charger into a standard electrical outlet.
3. Charge the batteries for up to 12 hours. This can be
done either separately or simultaneously.
4. After charging, disconnect the battery charging
cables from the receptacles and securely replace
the rubber battery receptacle covers.
5. Test the system to make sure that everything is
working properly.

Related product manuals