Daavlin 7 Series Installation Guide

Step
1
Step
2
Step
3
Roll unit onto its side.
Remove grids from foam
padding and place in secure
location until needed.
Attach feet to the
bottom of unit. To ensure
the stability of the unit, be
sure to place feet at the
proper angle as shown.
Back of 7 Series
7 Series Installation Guide
Front of 7 Series
LIT0112 Rev 0
C: Carefully slide the
unit toward the
bottom of the box far
enough to effectively
attach feet and
stabilizer bars.
B: Remove stabilizer bars
and feet and set aside.
Remove foam padding
from bottom of unit.
A: Unfold bottom of box.
(Bottom of box is where the
stabilizer bars and feet are stored)
Back of 7 Series
Bottom of Box

Daavlin 7 Series Specifications

General

Device Type	Phototherapy Device
Model	7 Series
Application	Treatment of skin conditions such as psoriasis, vitiligo, and eczema
Light Source	Fluorescent lamps
Power Supply	AC
Wavelength	311 nm (narrowband UVB)
UVB	Narrowband
Treatment Area	Full Body
Power Requirements	120V
Weight	Varies by model configuration
Dimensions	Varies depending on configuration
Certifications	CE Marked
Treatment Type	Narrowband UVB Phototherapy