To Next PageTo Next Page
Need help?Do you have a question about the DAB E-SWIM 150 and is the answer not in the manual?
General risk factors to consider before installation and operation.
Emphasizes installation and servicing must be done by authorized, competent personnel.
Appliance use is restricted to supervised children or trained persons.
Details various entrapment risks like hair, limb, body, and mechanical entrapment.
Highlights entrapment cases and the obligation to respect safety regulations.
Instructions to reduce entrapment risk, including SVRS recommendations.
Manufacturer is not liable for damage from tampering, modification, or misuse.
Overview of the centrifugal pump and electronic inverter system for pool automation.
Summary of electrical, construction, hydraulic, and working condition specifications.
Information specific to the Safety Vacuum Release System (SVRS).
Recommendations for pump installation, pipe sizing, and connections.
Chart for maximum recommended flow rate based on pipe size.
Guidance on sealing threaded connections and fitting selection.
Instructions for safe and correct electrical connection to the mains.
Details on connecting external signals for user inputs and outputs.
Configuration of auxiliary inputs for digital/analog control and earth connection.
Characteristics of the relay output contacts for the pump.
Explains regulating modes like flow control and fixed curve control.
Details manual, auto with timers, and auto with external control modes.
Step-by-step guide for starting and stopping the pump using manual mode.
How to change setpoints and parameters quickly via keys and arrows.
Setting up auto modes via timers or external remote control.
Procedure for filling the pump and pipes with water before operation.
Overview of the control panel's keys, LEDs, and LCD screen.
Step-by-step process for initial setup and parameter configuration.
Explanation of the information displayed on the main operating screen.
Access to WIZARD, language, date/time, and unit of measure settings.
Setting manual speeds and operating times for SET1-4 and Quick Clean.
Setting automatic filtration cycles using timers for different speeds and days.
Configuring external inputs for controlling pump speed and mode.
Enabling/disabling and setting parameters for the priming procedure.
Configuring antifreeze and anti-lock protections for the pump.
Consulting and erasing the fault history of the system.
Accessing system information, factory settings, and firmware updates.
How to manually cancel current errors and force a new attempt.
Details on faults that trigger automatic reset attempts.
Consulting the list of recent faults and blocks via the menu.
Procedure to reset all parameters to their original factory values.
Common causes and checks for a pump that fails to start.
Troubleshooting steps for when the pump is not drawing water.
Diagnosis for issues when the pump motor is not operating.
Identifying causes of abnormal noise from the pump.
Troubleshooting for reduced water flow from the pump.
Recommends periodic inspection and cleaning of the pump filter.
Guidelines for disposing of the product and its parts in compliance with regulations.
Details on warranty coverage, voiding conditions, and exclusions.
General risk factors to consider before installation and operation.
Emphasizes installation and servicing must be done by authorized, competent personnel.
Appliance use is restricted to supervised children or trained persons.
Details various entrapment risks like hair, limb, body, and mechanical entrapment.
Highlights entrapment cases and the obligation to respect safety regulations.
Instructions to reduce entrapment risk, including SVRS recommendations.
Manufacturer is not liable for damage from tampering, modification, or misuse.
Overview of the centrifugal pump and electronic inverter system for pool automation.
Summary of electrical, construction, hydraulic, and working condition specifications.
Information specific to the Safety Vacuum Release System (SVRS).
Recommendations for pump installation, pipe sizing, and connections.
Chart for maximum recommended flow rate based on pipe size.
Guidance on sealing threaded connections and fitting selection.
Instructions for safe and correct electrical connection to the mains.
Details on connecting external signals for user inputs and outputs.
Configuration of auxiliary inputs for digital/analog control and earth connection.
Characteristics of the relay output contacts for the pump.
Explains regulating modes like flow control and fixed curve control.
Details manual, auto with timers, and auto with external control modes.
Step-by-step guide for starting and stopping the pump using manual mode.
How to change setpoints and parameters quickly via keys and arrows.
Setting up auto modes via timers or external remote control.
Procedure for filling the pump and pipes with water before operation.
Overview of the control panel's keys, LEDs, and LCD screen.
Step-by-step process for initial setup and parameter configuration.
Explanation of the information displayed on the main operating screen.
Access to WIZARD, language, date/time, and unit of measure settings.
Setting manual speeds and operating times for SET1-4 and Quick Clean.
Setting automatic filtration cycles using timers for different speeds and days.
Configuring external inputs for controlling pump speed and mode.
Enabling/disabling and setting parameters for the priming procedure.
Configuring antifreeze and anti-lock protections for the pump.
Consulting and erasing the fault history of the system.
Accessing system information, factory settings, and firmware updates.
How to manually cancel current errors and force a new attempt.
Details on faults that trigger automatic reset attempts.
Consulting the list of recent faults and blocks via the menu.
Procedure to reset all parameters to their original factory values.
Common causes and checks for a pump that fails to start.
Troubleshooting steps for when the pump is not drawing water.
Diagnosis for issues when the pump motor is not operating.
Identifying causes of abnormal noise from the pump.
Troubleshooting for reduced water flow from the pump.
Recommends periodic inspection and cleaning of the pump filter.
Guidelines for disposing of the product and its parts in compliance with regulations.
Details on warranty coverage, voiding conditions, and exclusions.
General| Voltage | 230V |
|---|---|
| Maximum Head | 15 m |
| Protection Grade | IP55 |
| Insulation Class | F |
| Maximum Liquid Temperature | 60°C |
| Max Head | 15 m |
| Max Liquid Temperature | 60°C |
| Protection Rating | IP55 |
| Application | Swimming pool |
| Frequency | 50 Hz |
