Need help?Do you have a question about the DAB EVOSTA Series and is the answer not in the manual?
General| Insulation Class | F |
|---|---|
| Max Temperature | 110 °C |
| Liquid Temperature Range | -10 °C to +110 °C |
| Maximum Pressure | 10 bar |
| Maximum Liquid Temperature | 110 °C |
| Application | Water circulation, heating systems, cooling systems |
| Power Supply | Single phase |
| Working Pressure | 10 bar |
| Installation | Horizontal |
| Frequency | 50Hz |
| Impeller Material | Technopolymer |
Maximum allowable system pressure for the pump.
Recommended water and ambient temperatures for operation.
Warning against pumping flammable or dangerous liquids.
Warning about handling hot water and high temperatures.
Step-by-step instructions for standard pump electrical connection.
Step-by-step instructions for non-standard pump electrical connection.
Steps to set pump speed for rapid air bleeding.
Instructions on selecting and setting constant speed operation.
Explanation of fixed and proportional pressure modes.
Details on constant and proportional pressure modes.
Information on resetting alarms and requesting technical assistance.
Instructions on page navigation and using the reset function.
Guidance when pump fails and how to contact support.
Details on resolving pump faults, including automatic reboot.
Instructions for manual pump restart after faults or blockages.
Information and links regarding ecodesign directives.
Illustration of pump assembly with torque specification for fasteners.
To Next Page