Need help?Do you have a question about the DAB EVOSTA DPC 40-70/130 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Power Supply | Single-phase |
| Liquid Temperature Range | -10°C to +110°C |
| Insulation Class | F |
| Installation | Horizontal |
| Impeller Material | Technopolymer |
| Pump Body | Cast iron |
| Shaft Material | Ceramic |
| Port-to-port length | 130 mm |
| Application | Heating and cooling systems |
| Maximum Head | 7 m |
| Inlet/Outlet Size | 1 1/2" |
| Maximum Operating Pressure | 10 bar |
| Pumped Liquid | Clean, free of solids and mineral oils, non-viscous, chemically neutral, close to the properties of water |
| Type | Electronic circulator with permanent magnet synchronous motor |
| Material | Technopolymer |
Instructions for use by children and persons with reduced capacities.
Warning against pumping flammable or dangerous liquids.
Caution regarding hot water and high temperatures.
Details on the Energy Efficiency Index for circulators.
Technical data including pressure, water, and ambient temperatures.
Graphical representation of pump performance characteristics (Head vs. Flow).
Visual guidance for correct pump installation and orientation.
Instructions for safely connecting the pump to the power supply.
Procedures for pump bleeding and setting operating modes.
Understanding LED signals for different operational states.
Legend for alarm codes indicated by LED flashing patterns.
Diagnosing and resolving common faults like short circuits and blockages.
Steps for manual reset and automatic/manual pump restarts.
Instructions for environmentally responsible disposal of the product.
Information on Ecodesign requirements and related EU directives.
Recommended torque values for assembly of pump components.
Contact details for DAB Pumps Ltd. and its global subsidiaries.
To Next Page