EasyManua.ls Logo

Dacor DARWIN - Technical and Functional Characteristics; Technical Specifications; Algorithm and Functional Features; User Settings and History

Dacor DARWIN
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
TECHNICAL/FUNCTIONAL
CHARACTERISTICS
TECHNICAL CHARACTERISTICS
DEPTH MEASUREMENT:
Maximum displayed depth: 150 m (495 ft).
Measurement resolution: 10 cm in the 0-100 m
range / 1 m in the 100-150 m range.
Temperature compensation of the measurement.
Measurement accuracy: from 0 to 80 m, ±1% of
full scale.
Calibration in fresh water.
Difference in sea water: 2.5%.
TEMPERATURE MEASUREMENT:
Measurement range: -10 / +50 °C (14/122°F).
Measurement resolution: 1°C.
Measurement accuracy: ±2°C (±2°F).
ALGORITHM:
11 tissues from 2.5 to 480.
Deterministic-exponential algorithm, with M
values (low bubble) derived from the Rogers
and Powell studies conducted using Doppler
methods (modified Haldanean).
Deterministic-exponential algorithm, with M
values (low bubble) derived from the Rogers
and Powell studies conducted using Doppler
methods (modified Haldanean).
Display backlight: timer-controlled and
permanent
Power supply: 2 alkaline 1.5 V batteries (type
AAA) easily replaceable by the user.
Battery life:
Approximately 12 months with 50 dives
and occasional use of the backlight.
Approximately 10 dives with the backlight
always on.
Operating temperature: from -10 to +50°C
(14/122°F).
Storage temperature: from -20 to +70°C
(-4 /+158°F).
FUNCTIONAL CHARACTERISTICS
Operating modes:
Air”.
"Nitrox".
"Bottom Time".
Stop Mode: lockout in case of omitted stop
and/or uncontrolled ascent (unless disabled by
the user).
Depth display: meters/feet.
Temperature display: °C/°F.
Fresh/sea water selection: manual.
Altitude programs:
P0 (0-700 m) (0-2300 ft).
P1 (700-1500 m) (2300-4900 ft).
P2 (1500-2400) (4900-7900 ft).
P3 (above 2400 m) (above 7900 ft).
Decompression stops: up to 24 meters (79 feet).
Differentiated ascent rate: from 10 to 18
m/min (33 to 59 ft/min).
Audible alarms, which can be disabled:
Low battery.
Deco stop depth violation.
Excessive ascent rate.
No decompression limits reached.
Maximum permitted depth for the
programmed value of max PPO2.
Simulator mode.
Scrolling of no-decompression limits: from 12
to 48 meters (39 to 157 feet).
Calendar clock: Year, month, date, hour,
minutes (leap year management).
PC Interface: Optical, with RS232 serial
adapter.
User programmable parameters (via the buttons
or the PC interface):
"Air"/"Nitrox"/"Bottom Time".
Percentage Oxygen in Breathing Mix (from
21% to 50% in increments of 1%).
Max PPO2 (from 1.2 to 1.6 bar) (from 17.4
to 23.2 psi).
Altitude program.
Temperature measurement unit: °C / F.
Depth measurement unit: meters / feet.
Fresh/sea water.
Audible alarms (on/off).
Stop mode on uncontrolled ascent
(on/off).
Calendar clock settings.
Clear residual nitrogen memory.
History:
Total number of dives logged.
Total dive hours and minutes logged.
Greatest depth logged.
Coldest temperature logged.
Dives stored in logbook: 50 with profile for a
maximum of approximately 38 hours.
Profile point interval: 20 Sec.
Data stored in logbook:
Start date and time of the dive (year,
month, date, hour and min).
Dive settings:
Operating mode: "Air", "Nitrox",
"Bottom Time".
Salt/Fresh.
Darwin.qxd 29/03/2002 16.45 Pagina 6