4
DESCRIPTION OF OPERATING SYSTEM
4
-
37
Turning the knob counterclockwise
increases the lowering speed while
turning it clockwise decreases the
lowering speed. Also, turning it clock-
wisetoitsendcanxtheimplement
to a certain position.
(1) Lowering Speed Control Knob
(A) Fast (B) Slow
(C) Lock
LIFTING ARM (LOWER LINK) SPEED
CONTROL KNOB
• This knob does not control the
lifting speed of the lifting arm.
NOTE
t46O705a
t46O708a
(1) Double Acting Lever 1
(2) Double Acting Lever 2
(A) A PORT (C) C PORT
(B) B PORT (D) D PORT
DOUBLE ACTING LEVER
Pressure Returning
Basically a remote valve, which is a
detent type, is attached.
In a normal range you could lift up
and down an implement with shifting
and holding the lever.
When you let go your hold, the lever
would return to neutral automatically.
However, in case you shift the lever
in a detent range, hydraulic pressure
is still on. So, if you want to release it
out of the detent range, you need to
shift it again to the neutral.
Port Push Pull
lever1
A In
Out
B Out In
Lever2
C In
Out
D Out In
Port Coupler Size
A, B, C, D PT 1/2”
te170 (NS4710, NS6010, NS4710H, NS5310H, NS6010H)-���-04.indd 37 2021-03-15 �� 1:54:30
To Next Page
Loading...
