●Make sure to check the oil, gasoline,
etc., before starting the engine.
●Please ensure that the main stand and
the side stand is in a up-position when
starting the engine.
●Make sure that the front wheel is locked
when starting the engine.
●Drive with care for both safety reasons
and longer vehicle life.
●For 1month(or 1,000km) after purc-
hasing the vehicle, drive moderately
avoiding fast starts and fast acceleration.
<WHEN ENGINE IS COLD>
1. Verify the steering weel lock is released.
2. Make sure engine stop switch is in “ ”
(RUN) position
3. Make sure fuel cock lever is in “ON”
position.
4. Turn on main switch.
5. Put gear in neutral.
(Verify this with neutral indicator lamp)
6. Press the starter button without rotating
the throttle.
7. If engine is not started with throttle grip
closed, press starter button and open
throttle grip approximately 1/8 to 1/4.
8. Once engine is started, pull and release
throttle grip repeatedly to run engine
idle until engine is heated.
9. Verify side stand is positively in
original position and start slowly.
<WHEN ENGINE IS HOT>
1. Verify the steering wheel lock is released.
2. Make sure engine stop switch is in “ ”
(RUN) position.
3. Turn on main switch.
4. Put gear in neutral.(Verify this with
neutral indicator lamp)
17
STARTING THE ENGINE
●Do not press the starter button
when the engine is running. this
can damage the start motor.
●Keep hold brake lever when
starting.
CORRECT DRIVING OPERATION
To Next Page
Loading...
Need help?
General
