How to troubleshoot no electric power in DAESUNG MAREF DVT-2600 Medical Equipment?
If your DAESUNG MAREF Medical Equipment has no electric power, the issue might be a power connection error. Ensure the plug is correctly inserted into the power outlet.
What to do if DAESUNG MAREF Medical Equipment is power on but not operating?
If your DAESUNG MAREF Medical Equipment powers on but isn't operating, it could be a power supply error. Try turning the power to the controller off and on.
What to do if there is no air in the hose of DAESUNG MAREF DVT-2600?
If there is no air in the hose of your DAESUNG MAREF Medical Equipment, it might be due to a hose connection error or a bent hose. Check that the hose is correctly inserted into the device and is not bent.
Why is my DAESUNG MAREF DVT-2600 so noisy during operating?
If your DAESUNG MAREF Medical Equipment is noisy during operation, it may be due to the setting condition. Ensure that the device is installed horizontally and that there is nothing laying on top of the device or underneath.
What causes weak air injection in DAESUNG MAREF DVT-2600 Medical Equipment?
If your DAESUNG MAREF Medical Equipment has weak air injection, this could be caused by air hose damage. Contact the seller if there is a defect in the inner hose or cuff connection.
Lists conditions where the DVT-2600 system is not recommended for use.
Details the functions of the controller, including buttons, display, and operating modes.
Instructs to use the device only under medical supervision.
Details the steps for setting up and using the DVT-2600 device.
Provides a table of common conditions, causes, and solutions for device issues.
General| Brand | DAESUNG MAREF |
|---|---|
| Model | DVT-2600 |
| Category | Medical Equipment |
| Language | English |
To Next Page
