3.2 The functions
(1) Name of each part
1. Leg Pressure Button
Sets the pressure to be delivered.
When the user presses the START/STOP button, the pressure is set according to the
type of cuff connected. (LEG/CALF/BOOT CUFF: 40mmHg). This value is not able to be
changed during operation.
Basic pressure is set at 40mmHg. This pressure setting can be changed at 10mmHg
increments (ex. 40
→
50
→
60
→
20
→
30
→
40mmHg).
The LCD screen will remain turned off if the user does not apply the cuff, as the
controller automatically selects the cuff when the START/STOP button is selected.
6
DVT-2600
To Next Page
Loading...
