DAEWOO ELECTRONICS KOC-8HAFR - Trouble Shooting; Sparks in the Microwave; Error Codes

KOC-8HAFR_28
KOC-8HAFR_29
Trouble Shooting
▶
If you are uncertain about whether your appliance is working properly, this does
not automacally mean there is a defect. Try to deal with the problem yourself
rst by checking the points menoned below: If the recommendaons below do
not solve your problem, call our service department.
• Is the plug in the socket?
• Is the door closed properly?
• Is the fuse in the fuse box faulty?
• Are the power sengs and mes set properly?
• Are there objects in the microwave that shouldn't be there?
• Did you use the correct kitchen utensils?
• Are the venlaon openings blocked?
• Has the food been defrosted suciently?
• Did you turn over or sr the food during preparaon?
▶
SPARKS IN THE MICROWAVE
If you see sparks in the microwave, turn the microwave o immediately. Sparks can be caused by:
• metal or aluminium foil that touches the interior of the microwave;
• aluminium foil that is not correctly covering the food (points that sck up act as an antenna);
• metal from a closing strip or tableware with metallic edges;
• recycled paper that contains small metal parcles.
▶
ERROR CODES
ERROR 2 Temperature too high or temperature sensor faulty;
Allow to cook if this does not work, call the
service department.
ERROR 3 Temperature sensor not connected; call the service
department.
DESUK_KOC-8HAF7R.indd 31 2014-01-02 오전 10:28:45