Before the First Use of Your Air Fryer
• Remove all packing materials and discard responsibly.
• Ensure all parts are present see Description of Parts above.
• Check that there is no damage to the mains cable or product.
• Ensure that you clean your Air Fryer before first and every use.
• Wash the Fryer Drawer (3), Trivet (8) and Baking Tray (7) in warm soapy
water before use.
• DO NOT remove the silicone feet from the Trivet (8) as these are fitted to hold
the Trivet in place and prevent damage to the Fryer Drawer (3).
• Whilst using your Air Fryer for the first time you may notice a little smoke and
odour; this is normal and simply the grease used during manufacture and will
soon disperse.
Setting up Your Air Fryer
1. Place the air fryer on a solid, level, heat resistant
surface clear of all obstructions as described above.
2. Insert the mains plug into a suitable socket outlet.
3. The air fryer will beep to confirm it is connected to
the mains.
WARNING! Take care whilst handling the Fryer Drawer (3), use of
Oven Gloves are recommended.
4. Remove the Fryer Drawer (3) by pulling it by
the Drawer Handle (2).
5. Ensure that the Trivet (8) is placed in the
bottom of the Fryer Drawer (3) as shown
left.
6. Ensure the four Silicone feet (arrowed right)
are fitted to the Trivet (8) before inserting it
into the bottom of the Fryer Drawer (3).
To Next Page
Loading...
