Daewoo B25S-2 Disassembly/Assembly

Vehicle Systems Disassembly & Assembly
Disassemble & Assemble Tilt
Cylinders
Start By:
a. Remove tilt cylinder.
1. Use tool (A) to remove head (1) from the cylinder
body.
NOTICE
Use extra care not to damage the highly finished
surface of the cylinder rod and the bore of the cylin-
der body during disassembly and assembly of the tilt
cylinder.
2. Remove rod assembly (2) from the cylinder body.
3. Remove nut (3) from the cylinder rod.
4. Remove piston and seal assembly (4) from the
cylinder rod.
5. Remove head assembly (5).
6. Remove spacer (6) from the cylinder rod.
7. Loosen the nut and bolt on the rod eye.
Remove cylinder rod (7) and shims (8).
8. Remove seal assembly (10) and O-ring seal (9)
from the piston.
36
Tools Needed A
Spanner Wrench 1
IDCD421P
IDCD423P
IDCD424P
IDCD422P
A
6
8
7
6
10
1
2
3
4
5

Daewoo B25S-2 Specifications

General

Brand	Daewoo
Model	B25S-2
Category	Multi Terrain Loaders
Language	English