Daewoo B25S-2 User Manual

Power Train Disassembly & Assembly
NOTE : Use the following steps to install the oil cooled
disc type brakes. If new discs (7) are installed, soak
the discs in transmission drive train oil for one hour
prior to installation. Refer to the Operation and
Maintenance Manual for further information.
8. Put Loctite No. 17430 on the mating surfaces of
hub (8) and the transaxle housing. Install hub (8)
and bolts (10).
9. Install piston (9).
10. Install the plates and discs (7) into hub (8).
11. Put Loctite No.17430 on the mating surfaces of
hub (8) and cover (6). Install bolts (5) and cover
(6).
12. Install adapter (4) and bolts (3).
13. Install bolts (1) and wheel (2).
14. Bleed the brake system. Refer to the Testing and
Adjusting Manual for further information.
15. Remove tooling (A).
6
7
8
9
49
3
4
8
5
6

Daewoo B25S-2 Specifications

General

Brand	Daewoo
Model	B25S-2
Category	Multi Terrain Loaders
Language	English