Cyclone Freedom Pro 22.2V Cordless Vacuum
FLR00040
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
1. Once the dust level reaches the ‘MAX’
mark (arrowed left) on the Dust
compartment (4) it will need emptying
and the filters cleaned.
3. Hold the Motor Housing (11) and
press the Handle Release Catch (10)
arrowed left and remove the handle
assembly.
2. To empty the cleaner, hold the Dust Compartment
(4) over a dust bin and press the Dust Release
Catch (3) (arrowed right) and the base of the dust
compartment will swing open and allow the
collected dust to fall out into the dust bin.
Emptying and Cleaning Your Cordless Vacuum Cleaner
WARNING Always disconnect the cleaner from the mains charger before cleaning.
WARNING do not continue to use your vacuum cleaner once the ‘MAX’ mark has been
reached as permanent damage may occur to the appliance.
To Next Page
Loading...
